Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Hard drives are fragile. Exercise care when handling the hard drive.
CAUTION:
To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Identifier
Status
Procedure
1
Open the latch and using the pull tab, disconnect the hard-drive cable from the system board.
2
Remove the two screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.
3
Lift the hard-drive assembly along with its cable off the palm rest and keyboard assembly.
GUID-5DE1E07B-4633-4536-ACBF-4A3067007FE0
Released
computer. After working inside your computer, follow the instructions in
GUID-37921292-743B-4ABF-A66A-D7C2C75AAA32
Released
GUID-B6FB0CEF-C100-4A99-AF73-751FACDBE71F
Released
Removing the hard drive
19
After working inside
www.dell.com/
Removing the hard drive
41
Advertisement
