Advertisement
Identifier
Status
Removing the solid-state drive/Intel Optane
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
Remove the
base
cover.
Identifier
Status
Procedure
1
Loosen the captive screw that secures the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the palm
rest and keyboard assembly.
NOTE:
Solid-state drive shield is available only on computers shipped with NVMe solid-state drive.
2
In computers shipped with mSATA solid-state drive/Intel Optane, remove the screw (M2x3) that secures the solid-state drive/Intel
Optane to the palm rest and keyboard assembly.
3
Slide the solid-stare drive shield/Intel Optane shield and lift the solid-state drive shield/Intel Optane shield off the palm rest and
keyboard assembly.
4
Slide and remove the solid-state drive/Intel Optane from the slot.
GUID-EFFE3DA7-AFC7-4BB0-92C9-4A1B23C2F2F5
Released
computer. After working inside your computer, follow the instructions in
GUID-5BAAC44D-C63C-4E84-8264-5FBA1D4F995B
Released
GUID-14019E80-3BC4-4DA7-AC79-3E2EEE35266E
Released
www.dell.com/
Removing the solid-state drive/Intel Optane
17
After working inside
37
Advertisement
