Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
Remove the
base
cover.
Identifier
Status
Procedure
1
Open the latch and disconnect the display-assembly cable from the system board.
2
Note the routing of the display cable and remove the cable from its routing guides on the fan and palm rest and keyboard assembly.
3
Remove the three screws (M2.5x6) that secure the left hinge to palm rest and keyboard assembly.
4
Open the left hinge.
70
Removing the power-button board
GUID-A35BD2D5-B3B3-4708-AF1C-D61C58B9F952
Released
Removing the power-button board
computer. After working inside your computer, follow the instructions in
GUID-4676A113-655C-485B-92B7-D5464610812F
Released
GUID-DF89C161-5997-4629-B78C-F2388A2980A6
Released
33
After working inside
www.dell.com/
Advertisement
