Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
card.
Identifier
Status
Procedure
1
Open the latch and disconnect the display cable from the system board.
2
Note the routing of the display cable and remove the cable from its routing guides on the fan and palm rest and keyboard assembly.
3
Remove the six screws (M2.5x6) that secure the left and right hinges to the system board and palm rest and keyboard assembly.
60
Removing the display assembly
GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Released
Removing the display assembly
computer. After working inside your computer, follow the instructions in
GUID-7E5DC50B-52E4-450D-A406-E41951E197AB
Released
GUID-0DB1BB01-F8CB-4790-BA6D-6B2665AE0DA1
Released
29
After working inside
www.dell.com/
Advertisement
