Advertisement
Identifier
Status
Replacing the power button with fingerprint
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Identifier
Status
Procedure
1
Using the alignment posts, align the power button on the palm rest and keyboard assembly.
2
Slide and place the power button into the slots on the palm rest and keyboard assembly.
3
Replace the screw (M2x2) that secures the power button to the palm rest and keyboard assembly.
4
Adhere the fingerprint reader cable on the palm rest and keyboard assembly.
82
Replacing the power button with fingerprint reader
GUID-0C3EE813-46D4-4A46-9435-5A8AE8783F68
Released
computer. After working inside your computer, follow the instructions in
GUID-7149B903-B51D-44C2-A6F0-66161E60EC30
Released
38
reader
After working inside
www.dell.com/
Advertisement
