Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the screw holes on the processor fan with the screw holes on the palm rest and keyboard assembly.
2
Replace the two screws (M2.5x6) that secure the processor fan to the palm rest and keyboard assembly.
3
Slide and connect the processor-fan cable into the connector on the system board.
Identifier
Status
Post-requisites
Replace the
base
cover.
36
Replacing the processor fan
GUID-2FF685C4-775F-4421-B5A2-1A756F240756
Released
Replacing the processor fan
computer. After working inside your computer, follow the instructions in
GUID-29BDC32B-A0D0-4B0E-A0D1-6266AF234F5E
Released
GUID-742603A9-6883-4879-8F67-7C3DC7AFB5AD
Released
16
After working inside
www.dell.com/
Advertisement
