Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
card.
Identifier
Status
Procedure
Applicable on computers that are shipped with power button only.
1
Remove the three screws (M2.5x6) that secure the right hinge to the system board and palm rest assembly.
2
Lift the right hinge.
3
Disconnect the power-adapter port cable from the system board.
4
Peel and lift the power-adapter port along with its cable off the palm rest and keyboard assembly.
GUID-35D5032D-9652-403C-9A8A-F98FFABA8776
Released
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
GUID-7E5DC50B-52E4-450D-A406-E41951E197AB
Released
GUID-ACE3C9FD-E00F-4031-8DCA-A234DFD9F1D3
Released
After working inside
www.dell.com/
Removing the power-adapter port
23
49
Advertisement
