Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
NOTE:
Ensure that the hinges are opened to the maximum before replacing the display assembly on palm rest and keyboard
assembly.
1
Slide the palm rest and keyboard assembly at an angle under the hinges on the display assembly.
2
Place the palm rest and keyboard assembly on the display assembly.
3
Using the alignment posts, press the hinges down on the system board and the palm rest and keyboard assembly.
GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8
Released
Replacing the display assembly
computer. After working inside your computer, follow the instructions in
GUID-C139CA56-4144-4D70-91C4-DB20FFDD1213
Released
After working inside
www.dell.com/
Replacing the display assembly
30
63
Advertisement
