Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Identifier
Status
Procedure
1
Open the latch and disconnect the touchpad cable from the system board.
2
Gently peel the tape that secures the touchpad to the palm rest and keyboard assembly.
3
Remove the four screws (M2x2) that secure the touchpad to the palm rest and keyboard assembly.
4
Slide the touchpad along with its cable at an angle and lift the touchpad off the palm rest and keyboard assembly.
GUID-8D2AE471-594B-46FC-808B-9037BC410EC5
Released
computer. After working inside your computer, follow the instructions in
GUID-37921292-743B-4ABF-A66A-D7C2C75AAA32
Released
GUID-742101FC-6FE6-4658-A36F-EB460D240680
Released
Removing the touchpad
www.dell.com/
21
After working inside
Removing the touchpad
45
Advertisement
