Advertisement
Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the
wireless
card.
3
Remove the
display
assembly.
4
Remove the
display
bezel.
5
Remove the
display
panel.
6
Remove the
display
hinges.
Identifier
Status
Procedure
1
Disconnect the camera cable from the camera module.
2
Note the display cable routing and remove the cable from the routing guides on the display back-cover and antenna assembly.
3
Remove the display cable from the display back-cover and antenna assembly.
GUID-166DA787-661F-4E60-8975-5E84EDB0868D
Released
Removing the display cable
computer. After working inside your computer, follow the instructions in
GUID-C5882CF8-CD60-4AE0-B416-A26D761E0B1A
Released
GUID-39016EFB-2CF5-44BD-8218-B2B64C01A161
Released
49
After working inside
www.dell.com/
Removing the display cable
103
Advertisement
