Advertisement
Identifier
Status
Removing the power button with fingerprint
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Identifier
Status
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
solid-state drive/Intel
4
Remove the fan.
5
Remove the
heat
sink.
6
Remove the
wireless
card.
7
Remove the
power-button
8
Remove the
system
board.
9
Remove the
display
assembly.
Identifier
Status
Procedure
1
Peel the fingerprint reader cable off the palm rest and keyboard assembly.
2
Remove the screw (M2x2) that secures the power button to the palm rest and keyboard assembly.
3
Using a plastic scribe, release the fingerprint-reader board from the palm rest and keyboard assembly.
4
Lift the power button, along with its cable, off the palm rest and keyboard assembly.
80
Removing the power button with fingerprint reader
GUID-43423BFB-7BAA-4C7E-BA7A-12118E225EBA
Released
computer. After working inside your computer, follow the instructions in
GUID-0FDACDDE-9CD6-418D-ABA7-AB8694DDACF0
Released
Optane.
board.
GUID-EAF2DAD2-3A48-4CE0-B127-8F007A30D0F2
Released
37
reader
After working inside
www.dell.com/
Advertisement
