Advertisement
4
Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.
5
Replace the two screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.
6
Fold the hard-drive cable and connect it to the system board.
7
Slide the hard-drive cable into the connector on the system board and close the latch.
Identifier
Status
Post-requisites
1
Replace the battery.
2
Replace the
base
cover.
44
Replacing the hard drive
GUID-56AA2BC3-6EFC-43DA-A65A-1B08AC611390
Released
Advertisement
