Connecting The Printer To The Host Using A Parallel Cable - Ricoh Aficio AP2700 Setup Manual

Setting Up the Printer

Connecting the Printer to the Host Using a Parallel Cable

Connect the printer to the host computer using a parallel cable compliant with
IEEE 1284.
1
Follow these steps to connect the printer to your host computer.
A
Confirm that you have the correct cable.
B
Confirm that both the printer and the host computer are turned off.
C
Plug the 36-pin end of the parallel cable into the parallel port of the printer.
Reference
See "Guide to the Printer" in the "Printer Reference" to confirm the position
of the parallel port.
D
Squeeze the wire clips on each side of the connector together until they
snap into place. The clips hold the cable securely in place.
E
Plug the other end of the parallel cable into the computer's parallel port.
44
ZAEH231E