Snmp - Ricoh Aficio 1027 Network Manual

snmp

Use the "snmp" command to display
and edit SNMP configuration settings
such as the community name.
❖ View settings
msh> snmp
• Default access settings 1 is as
follows:
Community name:public
IPv4 address:0.0.0.0
IPv6 address:::
I P X
dress:00000000:000000000000
Access type:read-only
E f f e c t i v e
col:IPv4/IPv6/IPX
• Default access settings 2 is as
follows:
Community name:admin
IPv4 address:0.0.0.0
IPv6 address:::
I P X
dress:00000000:000000000000
Access type:read-write
E f f e c t i v e
col:IPv4/IPv6/IPX
• If "-p" is added, you can view
settings one by one.
• To display the current commu-
nity, specify its registration
number.
❖ Display
msh> snmp ?
❖ Community name configuration
msh> snmp "number" name
"community_name"
• You can configure ten SNMP
access settings numbered 1-10.
• The printer cannot be accessed
from SmartDeviceMonitor for
Admin or SmartDeviceMonitor
for Client if "public" is not reg-
istered in numbers 1-10. When
changing the community name,
use SmartDeviceMonitor for
Admin and SNMP Setup Tool
to correspond with printer set-
a d -
tings.
• The community name can be
entered using up to 15 charac-
P r o t o -
ters.
❖ Deleting community name
msh> snmp "number" clear name
❖ Access type configuration
a d -
msh> snmp "number" type
"access_type"
Access type
P r o t o -
no
read
write
trap
Remote Maintenance by telnet
Type of access per-
mission
not accessible
read only
read and write
user is notified of
trapmessages
2
75