Checking The Machine Status; Changing Names And Comments - Ricoh Aficio 1027 Network Manual

Checking the Machine Status

Follow the procedure below to check
machine status.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C
To obtain status details, select the
machine in the list, and then click
[Open] on the [Device] menu.
The machine status appears in the
dialog box.
D
Click [System] or [Printer].
The machine status appears in the
dialog box.
E
Quit SmartDeviceMonitor for Admin.
Note
❒ For details about items in the di-
alog box, see SmartDeviceMon-
itor for Admin Help.
Using SmartDeviceMonitor for Admin

Changing Names and Comments

Follow the procedure below to
change the names and comments of
the machine.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C
Select a machine in the list, and
then click [NIB Setup Tool] on the
[Tools] menu.
A Web browser opens and the
window for entering the login user
name and password for the Web
Image Monitor administrator ap-
pears.
NIB Setup Tool starts when the
network interface board is default.
Follow the instructions on the
screen.
2
49