Setting Up As A Print Server (Netware 3.X) - Ricoh Aficio 1027 Network Manual

Using a Printer Server
Setting Up as a Print Server
(NetWare 3.x)
1
Follow the procedure below to con-
nect the machine as a print server us-
ing NetWare 3.x.
A
Log on to the file server as a su-
pervisor or supervisor equivalent.
B
Start NIB Setup Tool from the
[Start] menu.
C
Click [Wizard], and then click [OK].
D
Select the printer you want to con-
figure, and then click [Next].
A dialog box prompting you to
perform the remaining configura-
tion tasks in the Web browser ap-
pears. Click [OK], and then wait
until Web Image Monitor starts au-
tomatically.
E
Cick [Login].
A dialog box for entering the login
user name and password appears.
F
Enter the login user name and
password, and then click [Login].
For details about the login user
name and password, consult your
network administrator.
G
Click [Configuration] in the left ar-
ea, and then click [NetWare].
• Print Server Name: Enter the
NetWare print server name. To
use the interface board as a
print server, enter the name of a
print server that is not active on
the file server. Use up to 47
characters.
• Logon Mode: Specify whether
to designate a file server or NDS
tree when logging on to Net-
Ware.
26
• File Server Name: When a file
server name is entered here,
only the specified file server is
searched for. This item is man-
datory. Use up to 47 characters.
• NDS Tree: To enable NDS mode,
enter the name of the NDS tree
you want to log on to. Use up to
32 alphanumeric characters.
• NDS Context Name: To enable
NDS mode, enter the print server
context. Use up to 127 characters.
• Operation Mode: Specify wheth-
er to use the interface board as a
print server or a remote printer.
• Remote Printer No.: This item is
effective when the interface
board is specified as a remote
printer. Enter the same number
as the number of the printer to
be created on the print server (0
to 254 characters).
• Job Timeout: When the interface
board is used as a NetWare re-
mote printer, the printer cannot
detect when a print job ends.
Therefore, the printer termi-
nates printing when a certain
period of time has elapsed since
it last received print data (i.e.,
when it has not received print
data for a certain period of
time). Specify here this period
of time (3 to 255 seconds). The
initial value is 15 (seconds).
• Frame Type: Select the frame type
from the drop-down menu.
• Print Server Protocol: Select the
protocol for NetWare from the
drop-down menu.
• NCP Delivery Protocol: Select
the protocol for NCP delivery.