Getting Printer Information Over The Network; Current Printer Status - Ricoh Aficio 1027 Network Manual

Monitoring and Configuring the Printer

Getting Printer Information over the Network

This section explains details of each item displayed in the printer status and in-
formation.
This manual covers all models, and therefore contains functions and settings
that may not be available for your model.
2

Current Printer Status

The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp", and "sftp" parameters.
• mshell: Use the "status" command.
1-Sheet Bypass Error: No Select
1-Sheet Bypass Error: Not Open
1-Sheet Output Error: No Select
1-Sheet Output Error: Not Open
Access Restricted
Add staples (Booklet: Back)
Add staples (Booklet: Both)
Add staples (Booklet: Front)
Adjusting...
Alert at Printer: Yellow LED
Call Service Center
Canceled
Canceling Job...
Card/Counter not inserted
Coin or amount not inserted
Coin/Key Counter not inserted
Configuring...
Cooling Down Fusing Unit...
Copy Tray
Cover Open: ADF
Cover Open: Bridge Unit Left
Cover Open: Bridge Unit Center
86
Messages Description
The one sheet bypass tray is open but printing from
another tray was selected.
The one sheet bypass tray is closed but printing from
the one sheet bypass tray was selected.
The one sheet bypass tray is open but printing from
another tray was selected.
The one sheet bypass tray is closed but printing from
the one sheet bypass tray was selected.
The job was canceled because user have no authority.
The staple of booklet finisher (back) is exhausted.
The staple of booklet finisher is exhausted.
The staple of booklet finisher (front) is exhausted.
The machine is initializing or calibrating.
An error has occurred.
There is a malfunction in the machine.
The job is reset.
The job is being reset.
The machine is waiting for prepaid card or key.
The machine is waiting for coin to be inserted.
The machine is waiting for coin or key counter.
Setting is being changed.
The fusing unit is cooling down.
Internal tray is full.
The document feeder is open.
The cover of the left bridge unit is open.
The cover of the middle bridge unit is open.