ABB EMAX 2 E4.2 Instruction Handbook Manual page 63

Disassembly instruction emaX 2 e4.2
6.14 PHASE 14 – POLES
Actions to be performed
Tools
Allen key
230
By means of the allen key unscrew the 2 screws
fixing the sensor cover to the pole.
4mm
Torx key
No. 10
No. 25
Flat screwdriver
Cross screwdriver
Hammer
232
By means of the torx key (size 10) unscrew the
Rod Ø5mm
screw fixing the wire to the pole.
Min. 200mm
234
By means of the flat screwdriver unhook the
sensor plug mounted below the sensor and
after manually remove the sensor plug.
.
231
Manually remove the sensor cover.
233
By means of the flat screwdriver remove the
cables cover and after manually remove the
wire.
235
Manually remove the sensor.
63