ABB EMAX 2 E4.2 Instruction Handbook Manual page 47

Disassembly instruction emaX 2 e4.2
6.10 PHASE 10 – OPERATING SHAFT ASSEMBLY
Actions to be performed
Tools
Cross screwdriver
189
Manually lift the operating shaft assembly and
by means of the flat screwdriver remove the 3
benzings.
Flat screwdriver (x2)
191
Manually remove the operating shaft assembly.
193
Manually remove the auxiliary contacts cam.
190
Manually lift the operating shaft assembly and
by means of the flat screwdriver remove the 3
pins.
192
By means of the cross screwdriver unscrew the
screw fixing the auxiliary contacts cam to the
operating shaft assembly.
194
By means of the cross screwdriver unscrew the
screw fixing the cam to the operating shaft
assembly.
47