ABB EMAX 2 E4.2 Instruction Handbook Manual page 22

22
INSTRUCTION HANDBOOK
6.4 PHASE 4 – TERMINAL BOX
Actions to be performed
Tools
Flat screwdriver
80
Manually unhook the connector indicated by
the arrow fixing the terminal box case to the
Torx key
circuit breaker main structure.
No. 8
Cross screwdriver
Pliers
82
Manually unhook the connector indicated by
the arrow fixing the terminal box case to the
circuit breaker main structure.
84
Insert the flat screwdriver as indicated in
the picture, slightly push it in the direction
indicated by the arrow and after complete the
removal of the connector pulling it.
81
Manually unhook the connector indicated by
the arrow fixing the terminal box case to the
circuit breaker main structure.
83
By means of the flat screwdriver unhook the
connector fixing the terminal box case to the
circuit breaker main structure.
85
By means of the torx key unscrew the 2 screws
fixing the 4 micro I/O assembly to the circuit
breaker main structure.