ABB EMAX 2 E4.2 Instruction Handbook Manual page 23

Disassembly instruction emaX 2 e4.2
86
Push the flat srewdriver in the direction
indicated by the arrow and after manually
remove the microswitch assembly.
88
Pull out the 4 auxiliary contacts from the 4
micro I/O assembly base.
90
Manually remove the terminal box case.
87
By means of the flat screwdriver separate the
4 micro I/O assembly cover from the 4 micro
I/O assembly base.
89
By means of the cross screwdriver unscrew the
3 screws fixing the terminal box case to the
circuit breaker main structure.
91
Manually pull and remove the connector
located in the right part of the terminal box
case.
23