ABB EMAX 2 E4.2 Instruction Handbook Manual page 44

44
INSTRUCTION HANDBOOK
180
Manually remove the pin and the nut.
182
By means of the flat screwdriver remove the
benzing and let the pin and the lever separate
by gravity.
184
Slightly push the flat screwdriver as indicated
by the arrow and after unhook the opening
springs group.
181
Manually remove the springs charging lever
from the circuit breaker main structure and the
spring behind the springs charging lever.
183
By means of the flat screwdriver remove the
benzing.
185
Lift the operating mechanism and by means
of the flat screwdriver unhook and remove the
lever.