ABB EMAX 2 E4.2 Instruction Handbook Manual page 25

Disassembly instruction emaX 2 e4.2
98
By means of the flat screwdriver push the pin
as indicated by the arrow and let the the I/O
shaft, the I/O shaft group support and the
leaf spring constituting the I/O shaft group
separate.
Disassembled parts
• 2 + 3 + 2 screws (Metal)
• 1 4 micro I/O assembly cover (Plastic)
• 1 4 micro I/O assembly base (Plastic) SEPARATE
TREATMENT (Thermoplastics containing
brominated flame retardants)
• 4 auxiliary contacts (Plastic and Metal)
SEPARATE TREATMENT (Thermoplastics
containing brominated flame retardants)
• 2 connectors (Plastic) SEPARATE TREATMENT
(Thermoplastics containing brominated flame
retardants)
• 1 connector with 2 microswitches (Plastic)
SEPARATE TREATMENT (Thermoplastics
containing brominated flame retardants)
• 1 microswtiches support (Plastic)
• 1 spring (Metal)
• 1 benzing (Metal)
• 1 pin (Metal)
• 1 I/O shaft (Plastic) SEPARATE TREATMENT
(Thermoplastics containing brominated flame
retardants)
• 1 I/O shaft group support (Metal)
• 1 leaf spring (Metal)
• 1 terminal box case (Plastic) SEPARATE
TREATMENT (Thermoplastics containing
brominated flame retardants)
25