ABB EMAX 2 E4.2 Instruction Handbook Manual page 45

Disassembly instruction emaX 2 e4.2
186
By means of the flat screwdriver push as
indicated by the arrow the pin and remove the
pin.
188
Manually remove the operating mechanism.
Operating mechanism contains springs: their removal constitutes a potential hazard if not
performed in the proper way and using dedicated tools. Based on this ABB indication is not to
remove them from the operating mechanism and to manage the assembly with the maximum
level of attention during disassembly and dismantle phases.
187
Pull the operating mechanism towards
the upper part of the circuit breaker main
structure.
45