ABB EMAX 2 E4.2 Instruction Handbook Manual page 13

Disassembly instruction emaX 2 e4.2
35
By means of the pliers remove the 4 pins and
the related nuts mounted at both sides of the
sliding contacts base.
Disassembled parts
• 2 + 2 + 6 screws (Metal)
• 2 side walls (Metal)
• 1 base (Plastic) SEPARATE TREATMENT
(Thermoplastics containing brominated flame
retardants)
• 1 cover (Plastic) SEPARATE TREATMENT
(Thermoplastics containing brominated flame
retardants)
• 2 springs (Metal)
• 1 auxiliary position contacts cap (Plastic)
SEPARATE TREATMENT (Thermoplastics
containing brominated flame retardants)
• 1 right side wall (Plastic) SEPARATE TREATMENT
(Thermoplastics containing brominated flame
retardants)
• 1 sliding contacts label (Adhesive paper)
• 3 flat cables assemblies (Plastic and Metal)
SEPARATE TREATMENT (Thermoplastics
containing brominated flame retardants)
• 1 connector cables assembly (Plastic and
Metal) SEPARATE TREATMENT (Thermoplastics
containing brominated flame retardants)
• 2 bars (Metal)
• 4 pins and related nuts (Metal)
• 1 sliding contacts base (Plastic) SEPARATE
TREATMENT (Thermoplastics containing
brominated flame retardants)
13