ABB EMAX 2 E4.2 Instruction Handbook Manual page 39

Disassembly instruction emaX 2 e4.2
157
Manually remove the assembly shaft.
159
By means of the cross screwdriver unscrew the
1 + 1 screws fixing the 2 spacers to the circuit
breaker main structure.
161
Manually remove the 2 spacers.
158
By means of the torx key unscrew the 3 screws
fixing the motor fixing plate and the support
mounted in the bottom part of the circuit
breaker main structure and after manually
remove the motor fixing plate and the support.
160
By means of the torx key unscrew the 1 + 1
screws fixing the spacers to the circuit breaker
main structure.
162
By means of the torx key unscrew the 4 screws
fixing the left shoulder to the circuit breaker
main structure.
39