ABB EMAX 2 E4.2 Instruction Handbook Manual page 24

Hide thumbs Also See for EMAX 2 E4.2:

INSTRUCTION HANDBOOK

By means of the flat screwdriver unhook the

2 microswitches from their support and after

separate the microswitches support from the

rest of the connector.

By means of the cross screwdriver unscrew

the 2 screws fixing the I/O shaft group to the

terminal box case.

By means of the pliers remove the spring

mounted on the I/O shaft group.

By means of the flat screwdriver push the 2

connectors as indicated by the arrow and after

manually complete the removal.

Manually remove the I/O shaft group.

By means of the flat screwdriver remove the

benzing mounted on the I/O shaft group.