ABB EMAX 2 E4.2 Instruction Handbook Manual page 50

Hide thumbs Also See for EMAX 2 E4.2:

INSTRUCTION HANDBOOK

6.11 PHASE 11 – POLES SEPARATION

Actions to be performed

Tools

Torx key

198

By means of the torx key unscrew the 2 screws

fixing the operating mechanism fixing plate

No. 30

and the lower cross beam to the poles.

Rod

Min. 200mm

Flat screwdriver

Scissors

200

By means of the rod push as indicated by the

arrow the 2 tie rods.

202

By means of the flat screwdriver unscrew

the screws fixing the 3 wires connecting the

measuring module connector to the sensors

mounted inside the poles.

199

Manually remove the operating mechanism

fixing plate and the lower cross beam.

201

Manually pull the 2 tie rods in order to

complete the removal.

203

By means of the scissors cut the cables coming

out from the poles and after separate the 3

poles.