ABB EMAX 2 E4.2 Instruction Handbook Manual page 11

Disassembly instruction emaX 2 e4.2
23
Manually remove the base and the cover.
25
After manually remove the sliding contacts
block.
27
Manually remove the auxiliary position
contacts cap located on the left side of the
sliding contacts block
24
By means of the flat screwdriver push up the
3 flat cables assemblies and the connector
cables assembly.
26
Manually remove the 2 springs located at both
sides of the sdling contacts block.
28
By means of the flat screwdriver unhook the
right side wall from the sliding contacts main
assembly as indicated in the picture.
11