Selecting Wireless Network Settings In Windows - Epson EX11000 Service Manual

Setting
IPv6
IP Address Display
Parent topic:

Selecting Wireless Network Settings in Windows

Before connecting to the projector, select the correct wireless network on your computer.
1. To access your wireless utility software, access the Desktop and double-click the network icon on
the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
• If your projector is configured for a direct wireless connection (Simple AP mode), select the
projector's SSID.
3. Click Connect.
Parent topic:
Options
On
Off
On
Off
Selecting Wireless Network Settings Manually
Wireless Network Projection
Description
Enables IPv6 to allow monitoring
and control of the projector over
a network using Epson Web
Control and PJLink. When
enabled, the following settings
are available:
Auto Configuration: selects
whether to automatically assign
addresses according to the
Router Advertisement
Use Temporary Address:
enables use of a temporary IPv6
address
Selects whether to display the IP
address on the network standby
screen and Home screen
60