Epson EX11000 Service Manual page 89

1. Turn on the projector, if necessary.
2. Press the Menu button on the projector or remote control.
3. Select the Network menu and press Enter.
4. Select Network Settings > Projector Control.
Note: If the Remote Password and the Web Control Password have not been set, a screen appears
prompting you to set them. Enter passwords up to 32 characters long. These passwords are used
for accessing the projector over a network, and you do not need to enter them to access the Network
Settings menu after you set them.
5. Select Web API Settings and then set Web API to On.
Parent topic: Using the Projector on a Network
89