Page 1 EX3220/EX5220/EX5230/EX6220/EX7220/ VS230/VS330/VS335W User's Guide...
Page 2 EX3220/EX5220/EX5230/EX6220/EX7220/ VS230/VS330/VS335W User's Guide Welcome to the EX3220/EX5220/EX5230/EX6220/EX7220/VS230/VS330/VS335W User's Guide.
Page 3: Introduction To Your Projector
• VS330/VS335W: Up to 2700 lumens of brightness (white light output and color light output) VS230: Up to 2800 lumens of brightness (white light output and color light output) EX3220/EX5220/EX6220/EX7220: Up to 3000 lumens of brightness (white light output and color light output)
Page 4: Product Box Contents
• 1.2× optical zoom ratio for improved zooming capability (EX5220/EX5230/EX6220/EX7220/VS330/VS335W) • Built-in closed captioning decoder • Epson's Instant Off and Direct Power On features for quick setup and shut down Product Box Contents Additional Components Optional Equipment and Replacement Parts...
Page 5 Make sure your projector box included all of these parts: Projector Remote control Remote control batteries (two AA alkaline) Power cord VGA computer cable USB cable (EX3220/EX5220/EX5230/EX6220/EX7220) Carrying case (EX3220/EX5220/EX5230/EX6220/EX7220) Wireless LAN module (EX5220/EX7220) Wireless LAN module cover French control panel stickers (included for Canada only)
Page 6: Additional Components
• To receive a component video signal, you need a D-sub, 15-pin, component-to-VGA video cable. You can purchase one from Epson or an authorized Epson reseller. • To receive an HDMI signal, you need a compatible HDMI cable. You can purchase one from Epson or an authorized Epson reseller.
Page 7 Option or part Part number Genuine Epson Replacement lamp (ELPLP78) V13H010L78 Replacement air filter (ELPAF32) V13H134A32 Wireless LAN module (ELPAP07) V12H418P12 Quick Wireless Connection USB key (ELPAP09) V12H005M09 Epson DC-06 document camera V12H321005 Epson DC-11 document camera V12H377020 Epson DC-20 document camera...
Page 8: Projector Part Locations
Parent topic: Introduction to Your Projector Related references Where to Get Help Related tasks Using the Projector Help Displays Projector Part Locations Check the projector part illustrations to learn about the parts on your projector. Projector Parts - Front/Top Projector Parts - Rear Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control...
Page 9: Projector Parts - Front/Top
Note: Your product may look different from the illustrations in this guide, but the instructions are the same. Exhaust vent Lamp cover Control panel Focus ring (EX3220/VS230) Kensington security lock slot Air filter cover Air filter and intake vent Zoom ring (EX5220/EX5230/EX6220/EX7220/VS330/VS335W)
Page 10: Projector Parts - Rear
Focus ring (EX5220/EX5230/EX6220/EX7220/VS330/VS335W) Remote receiver A/V Mute slide (lens cover) Front adjustable foot Foot release lever A/V Mute slide lever Horizontal keystone slider Parent topic: Projector Part Locations Projector Parts - Rear AC input port USB-A/document camera/wireless LAN module port USB-B port Audio ports S-Video port...
Page 11: Projector Parts - Base
Computer (VGA) port HDMI port Speaker Remote receiver Video port Wireless LAN module cover screw Parent topic: Projector Part Locations Projector Parts - Base...
Page 12: Projector Parts - Control Panel
Parent topic: Projector Part Locations Related tasks Installing a Security Cable Projector Parts - Control Panel EX3220/VS230 Power button/light Source Search button (searches for connected sources) Menu button (accesses projector menu system) Enter button (selects options) Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons...
Page 13 Help button (accesses projector help information) Wide/Tele buttons (adjust projected image size), horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons Projector status lights EX5220/EX5230/EX6220/EX7220/VS330/VS335W Power button/light Source Search button (searches for connected sources) Menu button (accesses projector menu system) Enter button (selects options) Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons Esc button (cancels/exits functions)
Page 14 Parent topic: Projector Part Locations Related references Projector Light Status...
Page 15 Projector Parts - Remote Control Power button...
Page 16 Computer button (selects connected computer source) Video button (cycles through connected video sources) Numeric buttons (enter numbers) Auto button (automatically adjusts position, tracking, and sync settings) Aspect button (selects the image aspect ratio) Num button (when held down, switches numeric buttons to number function) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and control wireless mouse functions) Enter button (selects options and controls wireless mouse functions)
Page 17: Setting Up The Projector
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Page 18 Rear Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
Page 19: Projection Distance
The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. EX3220/VS230 4:3 Aspect Ratio Image or Screen Screen or...
Page 20 EX5220/VS330 4:3 Aspect Ratio Image or Screen Screen or Projection distance image size Wide to Tele 50 inches 59 to 71 inches (150 to 180 cm) 80 inches 95 to 114 inches (241 to 290 cm) 100 inches 119 to 143 inches (302 to 363 cm) 150 inches 179 to 215 inches (454 to 546 cm) EX5230...
Page 21: Projector Connections
• For slide shows without a video source or computer, you can connect USB devices (such as a flash drive or camera) or an optional Epson document camera. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.
Page 22 • Windows 8.x: Click EPSON_PJ_UD in the upper right-corner, then select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software. • Windows 7/Windows Vista: Select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software.
Page 23 The projector displays the image from your computer's desktop and outputs sound, if your presentation contains audio. Parent topic: Connecting to Computer Sources Related references USB Display System Requirements Related tasks Connecting to a Computer for HDMI Video and Audio Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable.
Page 24 Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port.
Page 25: Connecting To Video Sources
Parent topic: Connecting to Computer Sources Related tasks Using the Remote Control as a Wireless Mouse Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's USB-B or HDMI port, you can still play sound through the projector's speaker system. Connect an optional stereo mini-jack adapter cable (with one 3.5 mm mini-plug and two RCA plugs).
Page 26 2. Connect the other end to the projector's HDMI port. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source.
Page 27 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source.
Page 28 Parent topic: Connecting to Video Sources Related tasks Connecting to a Video Source for Sound Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable.
Page 29: Connecting To External Usb Devices
1. Connect the audio cable to your video source's audio-out ports. 2. Connect the other end of the cable to the projector's Audio port or ports. Parent topic: Connecting to Video Sources Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector. USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected USB Source...
Page 30 Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class-compliant. Note: USB hard drives must meet these requirements: • USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported) •...
Page 31: Connecting To A Document Camera
USB-A port and to the document camera's USB Type B port. • For the Epson DC-11 document camera, connect it to the projector's Computer or Video port and to the corresponding port on the document camera. See the document camera manual for details.
Page 32: Installing Batteries In The Remote Control
• For the Epson DC-20 document camera, connect it to the projector's HDMI, Computer, or Video port and to the corresponding port on the document camera. See the document camera manual for details. Note: For additional features supported by software, connect your document camera to your computer instead of the projector.
Page 33 1. Open the battery cover. 2. Insert the batteries with the + and – ends facing as shown.
Page 34: Opening The Lens Cover
3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
Page 35 1. To open the projector's lens cover, slide the A/V Mute slide lever until it clicks into the open position. 2. To cover the lens or temporarily turn off the projected picture and sound, slide the A/V Mute slide cover closed. Parent topic: Setting Up the Projector...
Page 36: Wireless Network Security Guidelines
• Introduce a computer virus which could cause data loss or system crashes (damage) Parent topic: Wireless Network Projection Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the projector. Do not install any other type of wireless module.
Page 37 1. Remove the wireless LAN module cover screw. 2. Insert the wireless LAN module into the USB-A port.
Page 38: Using Quick Wireless Connection (Windows Only)
3. Attach the wireless LAN module cover and secure it using the screw you removed. The light on the wireless LAN module turns on when the module is installed and operating. The light flashes when the module is communicating over the network. Parent topic: Wireless Network Projection Related references...
Page 39 You see a screen like this: 3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the projector. 4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module. You see a projected message that the network information update is complete.
Page 40: Selecting Wireless Network Settings Manually
7. Connect the USB key to a USB port on your computer or laptop. Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then select Allow on the next screen. 8. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yes to disable the firewall for this application.
Page 41 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
Page 42 • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. (Default user name is EPSONWEB; default password is admin.) • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it.
Page 43 Wireless LAN Menu Settings Setting Options Description Wireless LAN Power Turns on wireless LAN support Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you quickly connect to one computer or use the optional Quick Wireless Connection USB Key to connect Advanced: lets you connect to multiple computers via a wireless network access point...
Page 44: Selecting Wireless Network Settings In Windows
Setting Options Description SSID Display Selects whether to display the SSID on the network standby screen IP Address Display Selects whether to display the IP address on the network standby screen Parent topic: Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer.
Page 45: Setting Up Wireless Network Security
Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network. Set up one of the following security options to match the settings used on your network: • WEP encryption • WPA security Note: Check with your network administrator for guidance on entering the correct information.
Page 46 Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the network you are connecting the projector to. Setting Options Description Security WEP and WPA types available Selects the type of security used on the wireless network WEP Encryption 128Bit...
Page 47: Setting Up Projector Network E-Mail Alerts
Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3.
Page 48: Network Projector E-Mail Alert Messages
When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mail containing the following information: • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector •...
Page 49: Controlling A Networked Projector Using A Web Browser
4. Select the Others menu and press Enter. 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button.
Page 50 Note: The web setup and control features support Microsoft Internet Explorer 8.0 or later, and Safari on networks that do not use a proxy server for connection. You cannot select all of the projector menu settings or control all projector functions using a web browser. Note: If you set Standby Mode to Communication On, you can use a web browser to select settings and control projection even if the projector is in standby mode.
Page 51 Power button control Selects Computer port source Selects Video, S-Video, and HDMI port sources Freeze button control A/V Mute button control Page Up and Page Down button controls Searches for sources Selects the network source Selects the USB Display or USB device source Volume button controls Closed Caption control 6.
Page 52: Using Basic Projector Features
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image Focusing the Image Using the Focus Ring Remote Control Operation Selecting an Image Source...
Page 53 1. Open the projector's lens cover. 2. Connect the power cord to the projector's power inlet.
Page 54: Turning Off The Projector
3. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue. This indicates that the projector is receiving power. 4.
Page 55 2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).
Page 56 3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the Status light is on or flashing.
Page 57: Selecting The Language For The Projector Menus
4. Close the projector's lens cover. Parent topic: Using Basic Projector Features Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2.
Page 58: Adjusting The Image Height
3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet.
Page 59 2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape.
Page 60: Correcting Image Shape With The Horizontal Keystone Slider
Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality.
Page 61: Correcting Image Shape With The Keystone Buttons
Related references Projector Feature Settings - Settings Menu Correcting Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Page 62 3. Press a keystone button on the projector's control panel to adjust the image shape. Note: The horizontal keystone adjustment buttons are labeled Wide and Tele on the EX3220/VS230. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the Keystone settings in the projector menus.
Page 63: Correcting Image Shape With Quick Corner
Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2.
Page 64: Resizing The Image
You see the Quick Corner adjustment screen: 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8.
Page 65: Focusing The Image Using The Focus Ring
• If the projector includes Wide and Tele buttons, press the Wide button on the projector's control panel to enlarge the image size. Press the Tele button to reduce the image size. EX5220/EX5230/EX6220/EX7220/VS330/VS335W EX3220/VS230 Parent topic: Using Basic Projector Features...
Page 66: Remote Control Operation
2. To sharpen the image focus, rotate the projector’s focus ring. EX5220/EX5230/EX6220/EX7220/VS330/VS335W EX3220/VS230 Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector.
Page 67: Using The Remote Control As A Wireless Mouse
19.7 feet (6 m) ± 30° ± 15° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
Page 68: Using The Remote Control As A Pointer
2. If you connected your computer to the Computer or HDMI port, also connect a USB cable to the projector's USB-B port and to a USB port on your computer (for wireless mouse support). 3. Start your presentation. 4. Use the following buttons on the remote control to control your presentation: •...
Page 69: Selecting An Image Source
1. Press the Pointer button on the remote control. 2. Use the arrow buttons on the remote control to move the pointer on the screen. 3. Press Esc to clear the pointer from the screen. Parent topic: Remote Control Operation Related references Projector Feature Settings - Settings Menu Selecting an Image Source...
Page 70 3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want. • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.
Page 71: Projection Modes
Video and HDMI sources USB port sources (computer display and external devices) Network source Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. •...
Page 72: Changing The Projection Mode Using The Menus
3. To change projection back to the original mode, hold down the A/V Mute button for five seconds again. Parent topic: Projection Modes Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
Page 73: Changing The Image Aspect Ratio
If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's menus. Changing the Image Aspect Ratio Available Image Aspect Ratios Parent topic: Using Basic Projector Features Related references Input Signal Settings - Signal Menu Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it.
Page 74: Color Mode
EX3220/EX5220/EX5230/VS230/VS330 Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images using the full projection area and maintains the aspect ratio of the image. Displays images using the full projection area at 4:3 aspect ratio.
Page 75: Changing The Color Mode
Available Color Modes Turning On Auto Iris Parent topic: Using Basic Projector Features Related references Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment.
Page 76: Turning On Auto Iris
Color Mode Description Theatre Best for movies projected in a dark room Photo Best for still images projected in a bright room Sports Best for television images in a bright room sRGB Best for standard sRGB computer displays Blackboard Best for presentations onto a green chalkboard (adjusts the colors accordingly) Whiteboard Best for presentations onto a whiteboard (adjusts the colors...
Page 77: Controlling The Volume With The Volume Buttons
4. Select the Auto Iris setting and choose one of the following: • High Speed to adjust brightness as soon as the scene changes. • Normal for standard brightness adjustment. Note: You can set Auto Iris for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting.
Page 78: Projecting A Pc Free Presentation
Projecting a PC Free Presentation You can use your projector's PC Free feature whenever you connect a USB device that contains compatible image or movie files. This lets you quickly and easily display and control them using the projector's remote control. You can also display a slide show of the images. Supported PC Free File Types Starting a PC Free Slide Show Starting a PC Free Movie Presentation...
Page 79: Starting A Pc Free Slide Show
File contents File type Details (extension) Image .jpg Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution .bmp Make sure the file resolution is not above 1280 × 800 .gif Make sure the file is not: •...
Page 80 The PC Free screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. •...
Page 81: Starting A Pc Free Movie Presentation
4. While projecting, use the following commands to control the display as necessary: • To rotate a displayed image, press the up or down arrow button. • To move to the next or previous image, press the left or right arrow button. 5.
Page 82 The PC Free screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. •...
Page 83: Pc Free Display Options
Related references PC Free Display Options Related tasks Connecting a USB Device or Camera to the Projector Disconnecting a USB Device or Camera From the Projector PC Free Display Options You can select these display options when using the projector's PC Free feature. Setting Options Description...
Page 84 Setting Options Description Screen Switching Does not display the next file automatically Time 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically; high resolution images may switch at a slightly slower rate Effect Wipe Transitions between images with a wipe effect...
Page 85: Adjusting Projector Features
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
Page 86: Stopping Video Action Temporarily
Related tasks Saving a User's Logo Image to Display Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
Page 87: Projector Security Features
2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into. • Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary. Press and hold the E-Zoom + button to zoom in more quickly.
Page 88 Entering a Password to Use the Projector Saving a User's Logo Image to Display Parent topic: Projector Security Features Setting a Password To use password security, you must set a password. 1. Hold down the Freeze button on the remote control for about ten seconds or until you see this menu. 2.
Page 89 5. Enter the password again. You see the message "Password accepted." 6. Press Esc to return to the menu. 7. Make a note of the password and keep it in a safe place in case you forget it. Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want...
Page 90 Entering a Password to Use the Projector If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a password whenever you turn on the projector. You must enter the correct password to use the projector. 1.
Page 91 • If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
Page 92 5. Use the arrow buttons on the remote control to surround the image area you want to use as the User's Logo and press Enter. You see a prompt asking if you want to select this image area. 6. Select Yes and press Enter. (If you want to change the selected area, select No, press Enter, and repeat the last step.) You see the User's Logo zoom factor menu.
Page 93: Locking The Projector's Buttons
To prevent anyone from changing the User's Logo settings without first entering a password, set a password and enable User's Logo security. Parent topic: Password Security Types Related tasks Shutting Off the Picture and Sound Temporarily Setting a Password Selecting Password Security Types Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector.
Page 94: Installing A Security Cable
You can install two types of security cables on the projector to deter theft. • Use the security slot on the projector to attach a Kensington Microsaver Security system, available from Epson. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
Page 95: Adjusting The Menu Settings
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Projector Setup Settings - ECO Menu...
Page 96 You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.
Page 97: Image Quality Settings - Image Menu
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
Page 98 Setting Options Description Color Temp. (color temperature) High Sets the overall color tone; High tints the image blue and Low Medium tints the image red Color Adjustment Slider bars for each color Adjusts the intensity of individual hues in the image Auto Iris Adjusts the projected luminance based on the image brightness...
Page 99: Input Signal Settings - Signal Menu
Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control.
Page 100 Setting Options Description Sync. Varying levels available Adjusts signal to eliminate fuzziness or flickering in computer images Position Up, down, left, right Adjusts the image location on the screen Progressive Sets whether to convert interlaced-to-progressive signals Video for certain video image types Film/Auto Off: for fast-moving video images Video: for most video images...
Page 101 Setting Options Description Input Signal Auto Specifies the signal type from input sources connected to computer ports Component Auto: detects signals automatically RGB: corrects color for computer/RGB video inputs Component: corrects color for component video inputs Video Signal Auto Specifies the signal type from the input sources connected to the Various video standards video ports...
Page 102: Projector Feature Settings - Settings Menu
Quick Corner: select to correct image shape and alignment using an on-screen display Zoom Varying levels available Adjusts the size of the projected image (EX3220/VS230)
Page 103 Setting Options Description Control Panel Lock Full Lock Controls projector button locking to secure the projector Partial Lock Full Lock: locks all buttons Partial Lock: locks all buttons except the power button Off: no buttons locked Pointer Shape Three shapes available Changes the shape of the remote control pointer feature Volume...
Page 104: Projector Setup Settings - Extended Menu
Correcting Image Shape with Quick Corner Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen Display Background: selects the screen...
Page 105 Setting Options Description User's Logo — Creates a screen that the projector displays to identify itself and enhance security Projection Front Selects the way the projector faces the screen so the image is oriented correctly Front/Ceiling Rear Rear Ceiling Operation Direct Power On Selects various operation options High Altitude Mode...
Page 106: Projector Network Settings - Network Menu
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Antenna level Projector Name...
Page 107: Projector Setup Settings - Eco Menu
Parent topic: Adjusting the Menu Settings Related tasks Selecting Wireless Network Settings Manually Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item. Setting Options Description...
Page 108 Setting Options Description Sleep Mode Automatically places the projector in standby mode after an interval of inactivity Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode Lens Cover Timer Automatically turns off the projector after 30 minutes if the lens cover is closed A/V Mute Timer Automatically turns off the...
Page 109: Projector Information Display - Info Menu
Lamp Hours Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is...
Page 110: Event Id Code List
Information item Description Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projector's serial number Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings...
Page 111: Projector Reset Options - Reset Menu
0899 A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. Parent topic: Projector Information Display - Info Menu Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu.
Page 112 Lamp Hours option. You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Network menu items • Lamp Hours • Password • Zoom (EX3220/VS230) Parent topic: Adjusting the Menu Settings...
Page 113: Maintaining And Transporting The Projector
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.
Page 114: Cleaning The Projector Case
Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
Page 115 Related references Projector Light Status Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. Note: Your product may look different from the illustrations in this guide, but the instructions are the same.
Page 116 Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table.
Page 117 3. Pull the air filter out of the projector. Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown and push gently until it clicks into place.
Page 118: Projector Lamp Maintenance
5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp as soon as possible when the following occurs: •...
Page 119 3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover. Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side of the lamp cover and not underneath it;...
Page 120 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 6. Grasp the raised section of the lamp and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling.
Page 121 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Push in the lamp firmly and tighten the screws to secure it.
Page 122 Caution: Do not over-tighten the screws. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks...
Page 123: Replacing The Remote Control Batteries
3. Select the Reset menu and press Enter. 4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Related tasks...
Page 124 1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3.
Page 125: Transporting The Projector
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...
Page 126: Solving Problems
• The projector's Help system can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...
Page 127: Projector Light Status
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. Power light Status light Lamp light Temp (temperature) light Power light...
Page 128 • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Flashing blue Orange Lamp has a problem.
Page 129: Using The Projector Help Displays
Epson for help. Flashing blue Flashing Flashing Auto iris error. Turn the projector orange orange off, unplug it, and contact Epson for help. Flashing blue Orange Orange Power error. Turn the projector off, unplug it, and contact Epson for help.
Page 130: Solving Image Or Sound Problems
4. Press Enter to view the solutions. 5. When you are finished, do one of the following: • To select another problem to solve, press Esc. • To exit the help system, press Help. Parent topic: Solving Problems Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound.
Page 131: Solutions When Image Is Incorrect Using The Usb Display Function
• For images projected from applications using Windows DirectX, turn off DirectX functions. • If the mouse cursor flickers, select Make the movement of the mouse pointer smooth in the Epson USB Display Settings program on your computer (feature not available with Windows 2000).
Page 132: Solutions When "No Signal" Message Appears
• Turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer. Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: •...
Page 133: Solutions When "Not Supported" Message Appears
Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) 1. Open the System Preferences utility and select Displays. 2.
Page 134: Solutions When The Image Is Not Rectangular
Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. •...
Page 135: Solutions When The Image Is Fuzzy Or Blurry
• If you connected an extension power cable, try projecting without it to see if it caused interference in the signal. • If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer.
Page 136: Solutions When The Image Brightness Or Colors Are Incorrect
Related references Projection Distance Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu General Projector Specifications Related tasks Focusing the Image Using the Focus Ring Cleaning the Lens Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: •...
Page 137: Solutions To Sound Problems
• If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port.
Page 138: Solutions To Projector Power Or Shut-Off Problems
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to turn on the projector. • The power cord may be defective. Disconnect the cord and contact Epson. • If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of inactivity.
Page 139: Solutions To Password Problems
Epson. Provide the request code and proof of ownership for assistance in unlocking the projector. • If you lose the remote control you cannot enter a password. Order a new one from Epson. Parent topic:...
Page 140: Solving Network Problems
Solving Network Problems Check the solutions in these sections if you have problems using the projector on a network. Solutions When You Cannot Access the Projector Through the Web Solutions When Network Alert E-Mails are Not Received Parent topic: Solving Problems Solutions When You Cannot Access the Projector Through the Web If you are unable to access the projector through a web browser, make sure you are using the correct ID and password, which are case sensitive.
Page 141: Technical Specifications
Projector Safety and Approvals Specifications Supported Video Display Formats USB Display System Requirements General Projector Specifications Type of display Poly-silicon TFT active matrix Resolution EX3220/VS230: 800 × 600 pixels (SVGA) EX5220/EX5230/VS330: 1024 × 768 pixels (XGA) EX6220/EX7220/VS335W: 1280 × 800 pixels (WXGA)
Page 142 Lens EX3220/VS230: F=1.44 Focal length: 16.7 mm EX5220/EX6220/EX7220/VS330/VS335W: F=1.58 to 1.72 Focal length: 16.9 to 20.28 mm EX5230: F=1.6 to 1.74 Focal length: 18.4 to 22.08 mm Color reproduction Full color, up to 1 billion colors Brightness EX3220/EX5220/EX6220/EX7220: Normal Power Consumption mode:...
Page 143 IDMS 15.4; white light output measured in accordance with ISO 21118. Contrast ratio 10000:1 with Normal Power Consumption mode Image size EX3220/VS230: 23 inches (0.58 m) to 350 inches (8.89 m) EX5220/EX5230/VS330: 30 inches (0.76 m) to 300 inches (7.62 m) EX6220/EX7220/VS335W: 33 inches (0.83 m) to 318 inches (8.08 m)
Page 144: Projector Lamp Specifications
USB Type B port compatibility USB 1.1 and 2.0 compliant for USB display or external mouse USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input, Epson document camera display, or wireless LAN module...
Page 145: Remote Control Specifications
Lamp life Normal Power Consumption mode: Up to about 5000 hours ECO Power Consumption mode: Up to about 6000 hours Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage.
Page 146: Projector Environmental Specifications
Power consumption Operating: (100 to 120 V) Normal Power Consumption mode: 283 W ECO Power Consumption mode: 207 W Standby: 0.24 W (Communication Off), 2.9 W (Communication On) Power consumption Operating: (220 to 240 V) Normal Power Consumption mode: 270 W ECO Power Consumption mode: 201 W Standby: 0.28 W (Communication Off), 3.0 W (Communication On)
Page 147: Supported Video Display Formats
For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Page 148 Display format Refresh rate (in Hz) Resolution (in pixels) MAC19" 1024 × 768 1024 × 768 MAC21" 1152 × 870 Composite video TV (NTSC) 720 × 480 TV (PAL) 50/60 720 × 576 TV (SECAM) 720 × 576 Component video SDTV (480i/480p) 720 ×...
Page 149 Display format Refresh rate (in Hz) Resolution (in pixels) HDTV (1080p) 24/30/50/60 1920 × 1080 EX5220/EX5230/EX6220/EX7220/VS330/VS335W Display format Refresh rate (in Hz) Resolution (in pixels) Computer signals (analog RGB) 60/72/75/85 640 × 480 SVGA 56/60/72/75/85 800 × 600 60/70/75/85 1024 × 768 WXGA 60/75/85 1280 ×...
Page 150 Display format Refresh rate (in Hz) Resolution (in pixels) TV (PAL) 50/60 720 × 576 TV (SECAM) 720 × 576 Component video SDTV (480i/480p) 720 × 480 SDTV (576i/576p) 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 ×...
Page 151: Usb Display System Requirements
** EX6220/EX7220/VS335W only Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projector's USB Display software. Requirement Windows Operating system Windows XP Professional, Home OS X 10.5.8 (32-bit); OS X 10.6.x, Edition, and Tablet PC Edition (32-bit);...
Page 152: Important Safety Information
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement FCC Compliance Statement for Wireless LAN 802.11b/g/n Adapter Trademarks Open Source Software License Copyright Notice Important Safety Information Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes.
Page 153: Important Safety Instructions
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. •...
Page 154 • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation.
Page 155 • Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress.

This manual is also suitable for:

Ex5220 Ex5230 Ex6220 Ex7220 Vs230 Vs330 ... Show all

Epson EX3220 User Manual

Quick Links

Related Manuals for Epson EX3220

Summary of Contents for Epson EX3220

This manual is also suitable for:

Table of Contents