Selecting Wireless Network Settings In Windows - Epson EB-770F User Manual

Setting
DNS Server 1/ DNS Server 2
IPv6
IP Address Display
Parent topic:

Selecting Wireless Network Settings in Windows

Before connecting to the projector, select the correct wireless network on your computer.
1. To access your wireless utility software, access the Desktop and double-click the network icon on
the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
3. Click Connect.
Parent topic:
Options
Various IP addresses
On
Off
On
Off
Selecting Wireless Network Settings Manually
Wireless Network Projection
Description
Sets the IP address for the DNS
server using 0 to 255 for each
address field. The DNS server
resolves the host name
Note: Do not use 127.x.x.x
(where x is a number from 0 to
255). When these settings are
not set and remain as 0.0.0.0,
DNS server information is
acquired using DHCP. After
acquiring the information, the
values remain as 0.0.0.0.
Enables IPv6 to allow monitoring
and control of the projector over
a network using Epson Web
Control and PJLink
Selects whether to display the IP
address on the network standby
screen and Home screen
63