Epson EX11000 Service Manual page 262

Power light Status light
Blue Off
Flashing blue Off
Flashing blue Varies
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Laser light Temp light
Off Off
Off Off
Varies Flashing
orange
Off Orange
Flashing Varies
orange
Orange Off
262
Status and solution
In standby, sleep mode, or
monitoring.
Preparing for monitoring or quick
startup mode; all features are
disabled.
Projector is too hot.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental
temperature is not too hot.
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Make sure the environmental
temperature is not too hot.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Laser warning. Turn the projector off,
unplug it, and contact Epson for help.
Laser has a problem. Turn the
projector off, unplug it, and contact
Epson for help.