Epson EX11000 Service Manual page 182

1. Hold down the Freeze button on the remote control for about 5 seconds or until you see this menu.
Note: If no password has been set, you will be prompted to set a password before you can view the
Password Protection setting.
2. Press the down arrow to select Password and press
You see the prompt "Change the password?".
3. Select Yes and press
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
6. Press Esc to return to the menu.
7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic: Password Security Types
Enter.
182
Enter.