2. Select the Network menu and press
3. Select Network Settings and press
Note: If the Remote Password and the Web Control Password have not been set, a screen appears
prompting you to set them. Enter passwords up to 32 characters long. These passwords are used
for accessing the projector over a network, and you do not need to enter them to access the Network
Settings menu after you set them.
4. Do one of the following:
• To connect directly to a wireless device (Simple AP mode), select Passphrase, press
and enter a passphrase from 8 to 63 characters long. When you are done, return to the Network
Settings screen, select Set, and follow the on-screen instructions to save your settings and exit
the menus. Skip the rest of these steps.
• To connect to a device via a wireless network router (infrastructure mode), select the Wireless
LAN menu and press
5. Select the Security setting and press
Enter.
Enter.
Enter. Continue with the next step.
Enter.
62
Enter,