Epson EX11000 Service Manual page 213

Setting
Gamma
RGBCMY
Reset to Defaults
Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode,
use the Light Source Brightness Control setting in the Operation menu.
Input Source Settings
To change settings for an input source, make sure the source is connected and select that source.
Note: You can restore the default settings of the Tracking, Sync, and Position settings by pressing the
Auto button on the remote control.
Setting
Source
Resolution
Aspect
Options
–2 to 2
Custom
Varying levels available
—
Options
—
Auto
Normal
Wide
See the list of available aspect
ratios
213
Description
Adjusts the colors by selecting one
of the gamma correction values or
referring to a gamma graph
Adjusts the hue, saturation, and
brightness for each color
Resets all settings for the Color
Mode currently selected
Description
Displays the current input source
selected
Sets the VGA input signal resolution
if not detected automatically using
the Auto option (only for computer
inputs)
Sets the aspect ratio (width-to-
height ratio)