Projector Identification System For Multiple Projector Control; Setting The Projector Id - Epson EX11000 Service Manual

• Set Light Source Mode to Custom and adjust the Brightness Level in the projector's Operation
menu
• Blend the image edges
• Match the image colors
• Adjust the Black Level
• Adjust the RGBCMY
• Scale the image
Note: In some cases, the brightness and color tones may not completely match, even after correction. If
brightness and color tone differences become more noticeable over time, repeat the adjustments.

Projector Identification System for Multiple Projector Control

Adjusting Color Uniformity
Configuring Tiling Manually
Blending the Image Edges
Matching the Image Colors
Adjusting the Black Level
Adjusting RGBCMY
Scaling an Image
Parent topic:
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.

Setting the Projector ID

Setting the Remote Control ID
Parent topic:
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Multi-Projection setting and press Enter.
Adjusting Projector Features
Using Multiple Projectors
158