Table of Contents
Advertisement
A message is displayed prompting you to enter the password for the certificate.
9. Enter the password and press
The certificate is imported and a completion message appears.
Parent topic:
Related references
Network Settings - Network Menu
Related tasks
Registering Digital Certificates from a Web Browser
Registering Digital Certificates from a Web Browser
You can register the digital certificates on the projector for wireless LAN authentication.
Note: You can also register the digital certificates in the projector's Network menu. However, be sure to
register just once or the certificate may not install correctly.
1. Make sure your digital certificate file is compatible with projector registration.
2. Make sure the projector is turned on.
3. Start your web browser on a computer or mobile device connected to the network.
4. Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see the Web Control screen and a prompt to enter a user ID and password.
5. Select Advanced and enter the following information in uppercase or lowercase letters, exactly as
shown:
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the Web Control Password. (You can change the Web Control Password
using the projector's Network Settings menu.)
6. Under Network, select Certificate.
Note: You may need to select the
Enter.
Registering a Digital Certificate on the Projector
menu icon to find Network, depending on your device.
81
Advertisement
Table of Contents
