List Of Components - Nibe EMINENT E/CU/R 35 Installation And Maintenance Instructions Manual

Dimensions and location of components
41
45
42
25
1
184
* Required space (EMINENT-E) for replacing/checking the
sacrificial anode.
35 litres: 180 mm
55 litres: 250 mm
100 litres: 390 mm
4
The chain anode can be used for vertical hanging in-
stallation, which only requires 180 mm above the water
45
heater.
4
5
The serial number (95),should always be stated
with all correspondence with NIBE.
072 _ _ _ _ _ _ _ _ _ _ _
4
This appliance can be used by children aged from 8 years and above and per-
sons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concer-
ning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Rights to make any design or technical modifications are reserved.
©NIBE 2014.
INSTALLATION AND MAINTENANCE INSTRUCTIONS
EMINENT
E/CU/R 35, 55, 100, 120
5
2
22
43
23
95
54 40
467
5
4
5
54 4
4
3
40
min 145
12
*

List of components

1 Power cord with earthed plug, length 850 mm
2 Plastic cover, electrical connection box
3 Plastic cover, anode (EMINENT-E)
5 Thermostat/temperature limiter
6 Immersion heater
12 Hanging bracket
13 Securing bracket
22 Shutoff/non-return valve
23 Safety/drainage valve
25 Mixing valve
4 40 Sacrificial anode (EMINENT-E)
45
41 Cold water connection, compression fitting
*
Ø15 mm
42 Hot water connection, compression fitting Ø15 mm
43 Connection safety/drainage valve, compression ring
coupling Ø15 mm
45 Venting screw (for air supply when draining)
95 Serial number sticker
EMINENT
6
EMINENT 35 = 565
EMINENT 55 = 750
EMINENT 100 = 1120
EMINENT-R 120 = 1304
EMINENT 35 = 565
EMINENT 55 = 750
EMINENT 100 = 1120
EMINENT-R 120 = 1304
min 200
**
13