Erasing A Waypoint - Raymarine RL70C Owner's Handbook Manual

90
4. To edit the waypoint name, press the NAME soft key.
The NAME WAYPOINT window is displayed.
Use the trackpad to enter or edit the name:
Use the left or right side of the trackpad to move the cursor to the character
you wish to change.
Use the top or bottom of the trackpad to scroll through the characters.
When you have finished editing the name, to remove the window, press
ENTER to save the name or CLEAR to cancel the operation. The waypoint
name replaces the waypoint number.
Press ENTER or CLEAR to return to the default soft keys.
5. To edit the waypoint position, press the EDIT WAYPOINT soft key, followed
by POSITION. The Waypoint Position pop-up is displayed.
Use the soft keys to select LAT, LON, BRG or RNG.
Use the trackpad to edit the value:
Use the left or right side of the trackpad to move the cursor to the character
you wish to change.
Use the top or bottom of the trackpad to scroll through the characters.
Adjust each parameter until the waypoint position is correct.
When you have finished editing the position, press ENTER to save the
position or CLEAR to cancel the operation. The Waypoint Position window
is removed from the screen and the default soft keys are displayed.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in routes.
However, you can remove a waypoint from the current route - see Editing a
Route in Section 5.4.
If you try to erase a waypoint that is used in a saved route you are warned
"WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED"
➤ To delete a waypoint using the cursor:
1. Move the cursor over the waypoint, until the letters WPT are displayed. The
waypoint soft keys are displayed.
2. Press the ERASE WAYPOINT soft key. The waypoint is removed from the
screen and the Waypoint List is updated.
➤ To delete a waypoint using the waypoint list:
1. Select the waypoint from the waypoint list as previously described. The
waypoint list soft keys are displayed.
2. Press the EDIT WAYPOINT soft key, followed by ERASE WAYPOINT. The
waypoint is removed from the screen and the waypoint list is updated.
HSB Series LCD Display