Controlling The Display; Selecting The Mode Of Operation - Raymarine RL70C Owner's Handbook Manual

Chapter 2: Getting Started

2.3 Controlling the Display

You control the radar display using the cursor and control keys. You start all
operations from the default screen, that is the default soft keys are displayed:
When you have completed an action using the soft keys, press ENTER to return
to the default screen; you may need to press ENTER several times to back-track
through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not
displayed all the time, press any soft key to display the labels.
This section describes how to:
• Select the full-screen mode and turn half-screen windows on/off.
• Customise the screen presentation options.
• Use the radar controls to enlarge a selected area, move the centre and
momentarily hide the ship's heading marker (SHM).
• Use the chart controls to move around the chart display. Synchronising the
chart and radar images is also described here.
The controls are summarised in the fold-out illustration on the following
page.

Selecting the Mode of Operation

You use the DISPLAY key to select the full-screen mode. If the data is available
on your system, the following modes (described on page 5) can be selected:
• Radar
• Chart
• Data log
The DISPLAY key also accesses the soft keys for the half-screen window
options.
➤ To change the mode, press the DISPLAY key to show the DISPLAY pop-up, then
press again to cycle through the modes available, shown in the following
diagram.
25
D4152-1