Gps Setup - Raymarine RL70C Owner's Handbook Manual

118

6.6 GPS Setup

GPS set up page provides you with information and the status of the tracked
navigation satellites for a SeaTalk GPS. It also enables you to SET UP a SeaTalk
Differential GPS, by manually retuning it to a different differential beacon.
➤ To select GPS Set Up:
Press MENU, then press the GPS SETUP... soft key.
The Navigation Status pop-up window shown below is displayed. This
window provides, for each tracked satellite, the satellite number, its signal
strength, azimuth angle and elevation angle from your vessel.
➤ To tune a differential SeaTalk GPS to another beacon:
1. Press D-GPS SETUP, the Differential GPS Setup pop-up is displayed with
MODE and BEACON SELECT soft keys.
2. Press MODE AUTO MAN to toggle the GPS to manual tuning.
3. Press BEACON SELECT, use the soft keys to set the required beacon
frequency and bit rate.
The status of the selected beacon is displayed in the pop-up.
Press ENTER to select the beacon and return to the Navigation Status
window, then ENTER to return to the MENU soft keys.
Note: Under normal circumstances RESTART GPS is not required.
NAVIGATION STATUS
1
FIX
HSB Series LCD Display
D4281-1