Raymarine RL70C Owner's Handbook Manual page 121

Chapter 5: Standard Chart Operations
3. To disable waypoint transfer, press the soft key STOP RECEIVING
WAYPOINTS.
Alternatively, press ENTER, or CLEAR, twice to close the Waypoint List.
➤ To send the waypoint list on NMEA:
1. Display the waypoint list as previously described, then press the WAYPOINT
TRANSFER soft key.
2. Press the soft key SEND WPT LIST ON NMEA.
The soft key changes to STOP RECEIVING WAYPOINTS.
The waypoint and route lists are transmitted from the chartplotter to other
instruments on NMEA.
➤ To receive the waypoint and route lists via HSB:
CAUTION
Copying waypoints from another HSB instrument overwrites any
existing waypoint and route lists.
1. Display the waypoint list as previously described, then press the WAYPOINT
TRANSFER soft key.
2. Press the soft key COPY WPTS FROM HSB, you are prompted to confirm.
Press NO to cancel the operation, then ENTER if you wish to remove the
route list.
Press YES to continue. The waypoint list is transmitted to the chartplotter
from another instrument on HSB. Whilst the data is being transferred the
soft key is blanked; when the transfer is complete the soft key is re-
displayed.
107