Using The Route List To Erase And Name A Route - Raymarine RL70C Owner's Handbook Manual

98
The soft keys allow you to toggle between ETA or total (elapsed) time, and
to change the Speed Over Ground (SOG) value used in the time
calculations. The current selections are highlighted.
➤ To change the SOG used for ETA calculations:
1. Press one of the PLANNED SOG keys to switch from actual to planned SOG.
2. Press the up or down PLANNED SOG keys to change the planned SOG value.
The Time values in the Route Information list are updated.
3. Press the ACTUAL SOG key to use the actual SOG value rather than a
planned one.
INFO FOR ROUTE-CURRENT ROUTE
4. Press ENTER to remove the Route Information window, then ENTER or
CLEAR to return to the route soft keys.
To return to the default soft key display, press ENTER .

Using the Route List to Erase and Name a Route

You can delete a route and you can re-name a route by selecting the route on the
route list.
➤ To select a route to delete or re-name:
HSB Series LCD Display
D4264-1