Chartplotter Functions - Raymarine RL70C Owner's Handbook Manual

12
Display options are provided in System Set Up and Chart Set Up as described in
Chapter 7. In addition Screen Presentation Options, described in Chapter 2 are
provided to switch:
• Cursor Box and Databoxes On/Off
• Chart Grid On/Off
• Custom Chart Details On/Off
Note: When you turn the display off and on again, these settings are retained in
memory.
The chartplotter set up options include a sub-menu to customise the
cartographic features. This menu allows you to switch features On, Off, or
control them using the CUSTOM soft key. The factory default settings for the
Custom chart options are as follows:
ON:
OFF:
CUSTOM: Spot sounding, light sectors, marine features.
Note: The factory defaut for the CUSTOM settings is ON.
Icons are displayed in detail, depth shading limit is 10 m and depth contour
display is 0-100 m.
A complete list of chart features is given in Appendix C.

Chartplotter Functions

The HSB Series Chartplotter includes the following functions:
• Display C-MAP NT C_Card chart information including Ports and Tides (if
available)
• View chart information (if available) for the Nearest Port
• Place, Move, Erase and Edit a Waypoint
• Goto Waypoint or Cursor
• Create, Save, Name, Edit and Follow a Route
• Review Route and Waypoint Lists
• Display vessel's track; Save and Name the Track for re-call to screen
• Measure Chart Distances and Bearings on-screen
• Set Up Alarms and Timers
• Man OverBoard (MOB) to navigate back to a missing person or object
• Differential GPS set up page
Operation of these functions is described in Chapters 5 and 6.
Chart text, chart boundaries, depth contours, navigation marks and
land features.
Caution and routing data.
HSB Series LCD Display