Motherboard Features - Supermicro X12SDV-4C-SPT4F User Manual

Table of Contents

Advertisement

Motherboard Features

CPU
Supports an Intel Xeon D-1700 processor series with up to 10 cores and a thermal design power (TDP) of up to 90 W.
Memory
Up to 128 GB of ECC and Non-ECC RDIMM/UDIMM DDR4 memory with speeds of up to 2933 MT/s in two memory slots
DIMM Size
64 GB at 1.2 V
Note: For the latest CPU/memory updates, refer to our website at http://www.supermicro.com/products/motherboard.
Expansion Slots
One PCIe 4.0 x8 Slot (SLOT7)
One PCIe 3.0/SATA3.0 OCuLink Connector
One M-Key M.2 PCIe 4.0 x4/SATA3.0 in 2280
Network
Two 25GbE SFP28 from SoC
One Intel X550 with two 10G Base-T
Baseboard Management Controller (BMC)
ASpeed AST2600
Graphics
Graphics controller via ASpeed AST2600
I/O Devices
One VGA through BMC AST2600
One dedicated IPMI LAN
One COM Header
One onboard TPM with jumper disabled
One TPM Header
Peripheral Devices
Two USB 3.0 ports on the rear I/O panel (USB2/3)
Two front accessible USB 2.0 headers (USB0/1)
BIOS
256 Mb AMI BIOS
SPI Flash BIOS
®
ACPI 6.0, Plug and Play (PnP), Riser Card Detection, and SMBIOS 3.0 or later
Note: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

X12sdv-8c-spt4fX12sdv-10c-spt4f

Table of Contents