Supermicro X12SDV-4C-SPT4F User Manual page 80

Super X12SDV-4C/8C/10C-SPT4F User's Manual
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of the serial port.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of the
serial port. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ
address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;), (IO=3E8h; IRQ=4;),
and (IO=2E8h; IRQ=4;).
Serial Port 2 Configuration
Serial Port 2 Configuration
This submenu allows you to configure the settings of Serial Port 2.
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of the serial port.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of the
serial port. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ
address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;), (IO=3E8h; IRQ=4;),
and (IO=2E8h; IRQ=4;).
Serial Port Console Redirection

COM1
Console Redirection
Select Enabled to enable console redirection support for the serial port. The options are
Enabled and Disabled.
*If the feature above is set to Enabled, the following features is available for
configuration:
80