Supermicro X12SDV-4C-SPT4F User Manual page 74

Super X12SDV-4C/8C/10C-SPT4F User's Manual
XHCI Hand-off
When this feature is disabled, the motherboard will not support USB 3.0. The options are
Enabled and Disabled.
PCIe PLL SSC
Use this feature to enable or disable PCIe PLL SSC. The options are Disabled and Enabled.
Server ME Information

General ME Configuration
The following General ME Configuration is displayed:
•
Oper. Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCH SATA0 Configuration

PCH SATA0 Configuration
SATA Controller 0
This feature enables or disables the onboard SATA controller supported by the Intel PCH
chip. The options are Disable and Enabled.
SATA Mode Selection
Select AHCI to configure an sSATA drive specified as an AHCI drive. Select RAID to configure
an sSATA drive specified as a RAID drive. The options are AHCI and RAID.
Support Aggressive Link Power Management
When this feature is set to Enable, the SATA AHCI controller manages the power usage of
the SATA link. The controller puts the link in a low power mode during extended periods of I/O
inactivity and then returns the link to an active state when I/O activity resumes. The options
are Disabled and Enable.
74