Supermicro X12SDV-4C-SPT4F User Manual page 96

Super X12SDV-4C/8C/10C-SPT4F User's Manual
Gateway IP Address
This feature displays the Gateway IP address for this computer. The address can be manually
entered. This should be in decimal and in dotted quad form (i.e., 172.31.0.1).
VLAN
This feature displays the virtual LAN settings. The options are Disabled and Enabled.
Configure IPv6 Support
IPv6 Address Status
IPv6 Support
Use this feature to enable IPv6 support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the following features are available for
configuration:
Configuration Address Source
This feature allows you to select the source of the IP address for this computer. If Static is
selected, you need to know the IP address of this computer and enter it to the system manually
in the field. If DHCP is selected, the BIOS searches for a Dynamic Host Configuration Protocol
(DHCP) server in the network that is attached to and request the next available IP address
for this computer. The options are DHCP and Static.
*If the feature above is set to Static, the following features are available for configuration:
Station IPv6 Address
This feature displays the Station IPv6 address for this computer. The address can be manually
entered. This should be in decimal and in dotted quad form (i.e., 192.168.10.253).
Prefix Length
Use this feature to set the IPv6 prefix length from the BMC.
IPv6 Router1 IP Address
This feature displays the IPv6 Router1 IP address for this computer. The address can be
manually entered. This should be in decimal and in dotted quad form (i.e., 192.168.10.253).
96